Historical FAQ (Frequently Asked Questions)

Question:

Which CoCut version do I need for my CorelDRAW version ?

Answer:

CoCut 9 works with CorelDRAW 6, 7, 8, 9, 10 & 11 (works only up to Windows XP Service Pack 1, sold out)
CoCut 11/12/4X3 works with CorelDRAW 6, 7, 8, 9, 10, 11, 12 & X3 (sold out)
CoCut 4X4 works with Corel 6, 7, 8, 9, 10, 11, 12, X3, X4 & X5
CoCut 2011 works with Corel 6-X6
VBA (Visual Basic for applications) must be available in your CorelDRAW version.

08.03.2010

Question:

CoCut/EuroCUT reports "Invalid license data" or the code must be entered each time you start CoCut.

Answer:

Please start the program one time as administrator.
Please go to the Windows start menu and start the program via right click and
choose “Run as administrator”.
Then enter the license informations.

08.03.2010

Question:

Which CoCut version works with which Windows system ?

Answer:

CoCut 9/10 works up to Windows XP Service Pack 1.
CoCut 11/12/4X3 works with Windows XP, Windows Vista
CoCut 4X4 works with Windows XP, Windows Vista & Windows 7

08.03.2010

Question:

Could you tell me if CoCut 12 would work with CorelDRAW X3?

Answer:

Download the latest CoCut service release.
Start the installation of the service release and select Modify.
In the next dialog select CoCut for CorelDRAW X3 under CoCut AutoExport and click on next.
After the installation has finished start CorelDRAW X3 and follow this steps to link the CoCut script with the CorelDRAW X3 toolbar:
- Select the menu Tools/Adjustment
- From the left-hand set of options select Workspace/Customize/Command
- Click once in the File box on the right of the list of options, select Macros and drag CoCutProf.CoCut... to the menubar of CorelDRAW X3.
- Click OK in the Options dialog box

07.03.2006

Question:

During the start of EuroCUT or CoCut the software show an error message "Invalid Code number".

Answer:

There can be two reasons for this error message:

1. The number in brackets is not different from your dongle number
In this case you have typed the wrong serial number or installed the wrong software.
That means you have installed CoCut Standard, for example, although you have a product number for CoCut Professional.
You can find the correct number in your manual or on your invoice.

2. The number in brackets is different from your dongle number.
If you are using a dongle for the parallel port, first of all delete all the printer drivers connected to the LPT port and remove any devices plugged in behind the dongle.
If the error persists after the drivers have been deleted, test the dongle on another computer.
If the error occurs on the other computer as well, your dongle has been overwritten and needs replacing. Contact your dealer about this.

31.03.2004

Question:

When the EuroCut/CoCUT setup is launched, the following error message occurs:
Error number: 0x80070725
Description: Incompatible version of the RPC stub

Answer:

This error is caused by a DLL that was installed on the system, such as Oleaut32.dll, Olepro32.dll, Asycfilt.dll, Stdole2.tlb, or others that are not compatible with that system. For example, version 3.50 of Oleaut32.dll is installed and used only by Windows XP and so causes this error if it is installed on a machine running any other operating system.
The only way to avoid this error is to download and run this executable from Microsoft.

10.10.2002

Question:

The company administrator was able to set up the macros in CorelDRAW 10 and copy them
to the toolbar without any problems. When the user (or any user regardless
of what type of priviledges they have, even administrative) attempts to add
the macro to the toolbar, it is not listed.

Answer:

The Problem is that Visual Basic for Application only works for the user who install CorelDRAW.
With the following work around VBA works for all users.
1. Log on as the Administrator (the one which installed the apps)
2. Start -> Run
3. type regedit [enter]
4. Goto HKEY_CURRENT_USER\SOFTWARE\COREL\CorelDraw\10.0
5. When the key is highlighted, select REGISTRY -> EXPORT REGISTRY FILE
6. Select a path to save the exported registry file that will be accessible
to all users
7. Now Log off as the Administrator
8. Log on as one of the users
9. Goto the path where you saved the exported registry files and Double
Click both of them
10. Select YES to add each one to the registry
11. Repeat the last three steps (8-10) for each user

12.06.2002

Question:

Although I activated the Option "Visual Basic for Applications" during the CorelDRAW 10 Installation I cannot add the CoCut / CoRun macro to the toolbar of CorelDRAW.

Answer:

This might be a bug of the CorelDRAW 10 installation, which can be fixed with a manually installation of "Visual Basic for Applications":
Start the VBA6 installation with a doubleclick in the Windows Explorer on vba6de.msi which can be found on the CorelDRAW 10 CD in the directory \Corel\Graphics10\Config\Redist\VBA6.
Then you should have the possibility to add the CoCut / CoRun macro to the toolbar like describe in the manual.

31.01.2002

Question:

If the object height exceeds e.g. 70cm CoCut and EuroCUT are changing right into the segmentation dialog.

Answer:

As default setting the Roland PNC 950 and 960 have their origin point at lower left. Nearly all other plotters have their origin point at lower right. So you have to press the Rotate button on your plotter panel, before you press the Setup button.

24.07.2001

Question:

How can I set the plotter´s origin point to the lower right position required by CoCut/EuroCUT?

Answer:

Turn off the plotter and set the dip switch 6 to on. This activates the plotters Rotate function which will set the origin point to lower right and the X axis in the foil running direction.

24.07.2001

Question:

Although Ive activated the read back button in the cutting dialog the returned value is 0. How can I adjust my plotter so the right foil width value is returned?

Answer:

The plotter has to be in the so-called host-mode. If you want to change the plotter settings, you first have to switch on your device. Now please press the <-button on the panel. After the plotter has made its initialisation, please press the function button as long as you can see priority in the display. Now press the enter-key and then the ^-key. In the display you will now see Host. Press the Enter button for confirmation.

24.07.2001

Question:

If you cut text elements, the output quality is very bad. Especially curves are cut jagged.

Answer:

This problem regularly appears if you cut with CorelDRAW 3, 4 and 5, especially when cutting small
characters. If you use one of these Corel versions the page size is limited. Therefore you must
design with factor 1:10 or anything else. You can reduce this problem if you set text elements as
large as possible, because CorelDRAW converts text to curves only as well as is necessary for
printing.
Note: The larger the original size of the text is, the better the conversion and the output
quality is.

24.07.2001

Question:

The output size cannot be changed and if you click on the register button CoCut gives a message that the copy protection device (dongle) is not properly plugged into the parallel port.

Answer:

First you should unplug all devices (incl. cables) behind the dongle and check once more if the
dongle can be detected. If the dongle can be detected, you should insert a second parallel interface
card into your computer and plug the dongle into this interface. If you can still not detect the
dongle when it is plugged into the parallel interface alone, you should make sure that the parallel
interface is set to Standard, Compatible or SPP.
You can usually set up
parallel interfaces which are integrated into your computers motherboard using the BIOS settings.
But if you are using an interface card, you will have to change the mode using so-called jumpers
on this card. If you can still not detect the dongle, check on another computer or on another
parallel interface if the dongle can be detected there. Our recent experience has shown that the
dongle is hardly ever faulty, but the parallel interface to which the dongle is plugged in is not
working properly.

Note: You must never plug a dongle into a serial or SCSI interface as this could damage
the dongle.

24.07.2001

Question:

The plotter cuts the first characters cleanly and then begins to draw indefinable curves.

Answer:

This is a typical buffer overflow problem when the plotter is driven serially. This occurs when the flow control is not properly set up for serial transmission. For serial data transmission most plotters are driven with the following parameters:

Bits per second	9600
Data bits	8
Stop bits	1
Parity	None
Flow control	Hardware

You can change these values under Windows 3.x over program manager / main group / control panel / ports / COMx / settings and under Windows 95 over start / settings / control panel / system / device manager / ports (COM and LPT) / COM port (COMx) / port settings. If your plotter is set to other communication parameters, you can generally find the values in the display under the interface or communication menu and enter them in the Windows control panel.

24.07.2001

Question:

How can I cut a graphic out of CorelDRAW 9 or 10, if I only have it in a bitmap format?

Answer:

Bitmaps need to be traced first, because only curves can be cutted.
If the additional graphic tool "CorelTRACE" has been installed with CorelDRAW, you can select the bitmap in CorelDRAW und a toolbar with bitmap tools will be displayed. Select the icon "Trace bitmap" (or the menu option "Bitmaps/Trace Bitmap"). CorelTRACE will then be opened in which you can select different tracing methods. Normally you should select the "Trace/By Outline" method.
If you then close CorelTRACE, the vector result will be placed over the bitmap in CorelDRAW and can be cutted with CoCut.

29.03.2001

[ FAQ ]