Historical FAQ (Frequently Asked Questions)

	Entry 5 from 7      ... 2 3 4 5 6 7
Question:	The output size of my graphics is more than twice as large as the original size.
Answer:	The default setting for the resolution of the Mimaki CG series is 0.025mm, although they can work with a resolution of 0.01mm. The drivers from EuroCUT and CoCut are set to 0.01mm, because of the higher speed and accuracy. To change the setting, press the "<"-key on the plotter panel. After the initialisation press the Function key as long as Step size is displayed. Change the value to 0.01 with the "^"-key and confirm your selection with the Enter and End keys.
24.07.2001

[ FAQ ]