Historical FAQ (Frequently Asked Questions)

Entry 17 from 17    Start   Back ... 14 15 16 17 More: not possible   End: not possible
Question: The plotter cuts the first characters cleanly and then begins to draw indefinable curves.
Answer: This is a typical buffer overflow problem when the plotter is driven serially. This occurs when the flow control is not properly set up for serial transmission. For serial data transmission most plotters are driven with the following parameters: 

Bits per second9600
Data bits8
Stop bits1
ParityNone
Flow controlHardware

You can change these values under Windows 3.x over program manager / main group / control panel / ports / COMx / settings and under Windows 95 over start / settings / control panel / system / device manager / ports (COM and LPT) / COM port (COMx) / port settings. If your plotter is set to other communication parameters, you can generally find the values in the display under the interface or communication menu and enter them in the Windows control panel.

24.07.2001

Keywords: CoCut EuroCUT Plotter
Database-ID:27520819524497

[ FAQ ]